How to Set Up an eSIM on iPhone 13 (Carrier, QR Code or Transfer)

//

Michael Collins

To set up an eSIM on an iPhone 13, get the eSIM from your carrier, connect to Wi-Fi, and follow the prompt your carrier triggers: tap the Carrier Cellular Plan Ready to Be Installed notification, scan the carrier’s QR code with the Camera app, or move the number from your old iPhone with eSIM Quick Transfer. Each route ends with Continue and a short wait while the plan activates.

These steps cover the iPhone 13, 13 mini, 13 Pro and 13 Pro Max on iOS 27, the current version, and they also fit iOS 26 and iOS 18 except where a section names a version. Labels say Cellular in the US; some regions show Mobile Data instead.

What the iPhone 13 can do with eSIM

An eSIM is a SIM built into the phone. Instead of inserting a card, you download your carrier’s plan onto it. The iPhone 13 has both a nano-SIM tray and eSIM, and Apple lists it among the models that support Dual SIM with two eSIMs, in addition to a physical SIM plus an eSIM. That gives you three possible setups:

  • One line on eSIM only, with the SIM tray empty.
  • A physical SIM plus an eSIM, for example a personal number on the card and a work or travel line on eSIM.
  • Two eSIMs, with the tray empty.

You can store more plans than you use. Apple’s eSIM setup page says an iPhone can manage up to eight or more eSIMs, but only two lines can be active at the same time.

Illustration comparing the eSIM setups an iPhone 13 supports: a physical SIM plus an eSIM, or two eSIMs
Illustration: the two Dual SIM setups an iPhone 13 supports

Before you start

Run through this list first. Each point below can stop an eSIM from installing.

  • Your carrier must support eSIM. If it does not, keep using a physical SIM or move to a carrier that does. Prepaid and business plans sometimes have their own rules, so ask.
  • Connect to Wi-Fi or a hotspot. Apple asks for a connection during setup. Some eSIM-only iPhone models can activate without Wi-Fi in certain countries, but the iPhone 13 has a SIM tray, so plan on Wi-Fi.
  • Update iOS. Open Settings > General > Software Update and install what is offered. Some methods below need a minimum version.
  • Check the carrier lock if you are adding a second carrier. Open Settings > General > About and look at Carrier Lock. No SIM restrictions means the phone is unlocked. Apple says that to use two different carriers, your carrier must unlock the iPhone, or both plans must come from the same carrier. The guide to unlocking an iPhone, including a carrier lock explains how to ask for one.
  • Check where the phone was sold. Apple says that in China mainland only a few recent models support eSIM, so an iPhone 13 sold there uses two nano-SIM cards instead. In Hong Kong and Macao, certain models also use two nano-SIM cards.
  • Have your carrier details ready. That means your account PIN or password and, for a QR code or manual setup, the code or details the carrier sent.

Which setup method to use

Your carrier decides which methods it offers, so the method usually picks itself. This table matches the situation to the route.

Your situation Method What you need
You bought the iPhone 13 or the plan from the carrier Carrier activation Nothing extra; the carrier assigns the eSIM
You are moving a number from another iPhone eSIM Quick Transfer Both iPhones on iOS 18.4 or later, same Apple Account
The carrier gave you a QR code QR code A second screen or printout showing the code
The carrier sent a link or uses its own app Carrier link or app iOS 17.4 or later for links
The carrier sent text details instead of a code Enter Details Manually The details from the carrier
You are coming from an Android phone Transfer from Android or carrier iOS 26 or later and a supported carrier
You want to replace the SIM card already in the iPhone 13 Convert to eSIM A carrier that supports conversion

Set up an eSIM with a QR code

A QR code is the most common route for a new line, a second number or a travel data plan. Show the code on another screen or print it, since the iPhone camera cannot scan a code displayed on its own screen. If the code arrived in an email on the iPhone itself, use the tap-and-hold option in step 2 instead.

  1. Open the Camera app and point it at the QR code. A Cellular Plan Detected notification appears at the bottom of the screen.
  2. Tap Cellular Plan Detected. On iOS 17.4 or later, if the code is in an email or web page on this iPhone, touch and hold the code and tap Add eSIM instead.
  3. Tap Continue at the bottom of the screen.
  4. Tap Add Cellular Plan. The iPhone downloads the plan, which usually takes a minute or two.
  5. If the iPhone asks for a confirmation code, enter the number your carrier provided.
  6. When the iPhone asks how to use the new plan, pick a label and choose the default line for calls and texts and the line for cellular data. The section on settings after setup below explains each choice.
Example cellular line labels and defaults during eSIM setup (illustration)
Illustration: Example cellular line labels and defaults during eSIM setup.

Keep the QR code until the line is working. Some carriers issue codes that work only once, and if setup stops halfway, the carrier may have to send a new one.

Illustration of four steps to add an eSIM on iPhone by scanning a carrier QR code with the Camera app
Illustration: adding an eSIM from a carrier QR code

If you are setting up a new or erased iPhone 13, the same code works during setup: on the Set Up Cellular screen, tap Use QR code and follow the prompts.

Use carrier activation

Carrier activation is the route when you buy an iPhone or a new plan from a carrier and give them your details. There is nothing to scan.

  • If the eSIM was assigned when you bought the phone, turn the iPhone on and follow the setup screens. The plan activates as part of setup.
  • If you asked for the eSIM after the phone was already set up, use these steps:
  1. Wait for the notification Carrier Cellular Plan Ready to Be Installed and tap it.
  2. If you missed the notification, open Settings and tap Carrier Cellular Plan Ready to Be Installed near the top.
  3. Tap Continue at the bottom of the screen.
  4. Make a test call. If the call fails, contact the carrier.
  5. If the new eSIM replaces the plan on a physical SIM, remove the SIM card and restart the iPhone.
Slide to power off screen on iPhone (illustration)
Illustration: Slide to power off screen on iPhone.

Move your number from another iPhone with eSIM Quick Transfer

eSIM Quick Transfer moves a line from your previous iPhone without a call to the carrier, as long as the carrier supports it. Apple lists four conditions: both iPhones are signed in to the same Apple Account, the old iPhone is unlocked with its passcode, both phones are nearby with Bluetooth on, and both run iOS 18.4 or later.

During the setup of a new iPhone 13, the transfer usually appears as a prompt to move your number; follow it. With iOS 26 or later you can move more than one number. To do it after setup:

  1. On the iPhone 13, open Settings and tap Cellular.
  2. Tap Set Up Cellular or Add eSIM.
  3. Pick the number to transfer from the list. If no numbers appear, tap Transfer From Nearby iPhone.
  4. On the old iPhone, tap Transfer to confirm, or enter the verification code shown on the iPhone 13 if asked.
  5. Wait while the plan activates on the iPhone 13. The SIM on the old iPhone stops working at that point.
  6. If a Finish Setting Up Your Carrier’s Cellular Plan banner appears, tap it to finish on the carrier’s website.
Carrier setup banner on the iPhone Cellular page (illustration)
Illustration: Carrier setup banner on the iPhone Cellular page.

Moving the number is one part of switching phones. Apps, photos and settings travel separately, and the guide to transferring data from an old iPhone to a new iPhone covers Quick Start and the other routes.

Illustration of the iPhone Settings path Settings, Cellular, Add eSIM, Transfer From Nearby iPhone
Illustration: where to start eSIM Quick Transfer after setup

Use a carrier link, carrier app or manual details

Carrier link. On iOS 17.4 or later, some carriers send a link by email or text. Tap it, tap Allow when Activate New eSIM appears, then tap Continue.

Carrier app. If your carrier supports activation in its own app, download the app from the App Store and buy or activate the plan there. Some carrier apps can also move your number from your previous phone.

Enter Details Manually. Some providers, especially travel eSIM sellers, send text details instead of a QR code, usually an address for their activation server and an activation code.

  1. Open Settings and tap Cellular.
  2. Tap Add eSIM (shown as Add Cellular Plan on some versions).
  3. Tap Enter Details Manually at the bottom of the screen.
  4. Type the details exactly as the carrier sent them, then follow the prompts.
Blank manual eSIM activation fields (illustration)
Illustration: Blank manual eSIM activation fields.

Move an eSIM from an Android phone

Apple’s page on transferring an eSIM from Android to iPhone sets the requirements: an iPhone on iOS 26 or later, an Android phone on Android 16 or later, and a carrier that supports the transfer. In the US, Apple lists AT&T, Cricket, FirstNet, T-Mobile, Verizon and Xfinity Mobile. Connect both phones to Wi-Fi and turn on Bluetooth.

  1. Put the two phones next to each other.
  2. On the iPhone 13, open Settings and tap Set Up Cellular, then Transfer from Android. If the iPhone already has a line, tap Cellular > Add eSIM > Transfer from Android.
  3. Tap Transfer From Android to show a QR code.
  4. Scan the code with the Android phone’s camera.
  5. On the Android phone, select the number and tap Transfer.
  6. On the iPhone, tap Done when the transfer finishes, then OK, and make a test call.
Cellular setup completion screen with a Done button (illustration)
Illustration: Cellular setup completion screen with a Done button.

If the phones cannot scan, tap Other Options on the iPhone and pair them with the session ID and code it shows. If your carrier or phone is not supported, the carrier can move the number with carrier activation or a QR code instead.

Convert the SIM card in your iPhone 13 to an eSIM

If the line you want on eSIM is already on a SIM card in this iPhone 13, some carriers let you convert it on the phone. When yours does, a Convert to eSIM option appears in Settings > Cellular. Tap it, confirm the prompts, and double-click the side button if the iPhone asks you to approve. The SIM card stops working once the eSIM is active.

After the conversion, take the card out of the tray on the left side of the phone; the guide to removing the SIM from an iPhone 13 shows where the hole is. Hold on to the old card for a couple of weeks in case the carrier needs it; AT&T, for example, asks customers to keep it for at least 14 days. If Convert to eSIM never appears, the carrier does not offer it on your plan, and its support team can set up the eSIM another way.

Settings to choose after the eSIM is added

When a second line is active, the iPhone 13 asks a few questions. You can change every answer later in Settings > Cellular.

  1. Label each plan. Tap a number, then Cellular Plan Label, and pick a name such as Personal, Business or Travel. The label is what you see when you choose a line later.
  2. Choose the default number. This line is used for calls and messages to people who are not in your Contacts.
  3. Choose lines for iMessage and FaceTime. Pick one line or both.
  4. Choose the cellular data line. In Settings > Cellular > Cellular Data, tap the number that should carry mobile data. Only one line uses cellular data at a time.
  5. Decide on Allow Cellular Data Switching. It is on the Cellular Data screen. With it on, the iPhone can use data from either plan depending on coverage.
Allow Cellular Data Switching on the Cellular Data screen (illustration)
Illustration: Allow Cellular Data Switching on the Cellular Data screen.

Apple’s Dual SIM with eSIM page covers these choices in full. The guide to changing the primary and secondary SIM on an iPhone 13 walks through swapping the default and data lines later, choosing a line per contact, and what happens to calls on the other number.

Using an eSIM for travel

A travel eSIM is a data plan you add before a trip with any of the methods above, usually a QR code. Install it at home on Wi-Fi so you are not stuck at an airport without a connection. On iOS 26 or later, the iPhone can show Turn On Travel eSIM when you arrive, and you choose Travel eSIM Only or Travel eSIM and Current eSIM.

Keep your home number as the default line for calls and texts and make the travel plan the Cellular Data line. Roaming is set separately for each line; the guide to turning on data roaming on an iPhone 13 shows where the switch is for each one. If you text people at home from the travel number, see how iMessage, RCS and SMS handle international numbers. When you get back, open Settings > Cellular, tap your home line and make sure Turn On This Line is on.

Check that the eSIM is working

  • Status bar. The carrier name or signal bars for the new line appear at the top of the screen. With two active lines, swipe down from the upper-right corner to open Control Center and see both carriers.
  • Settings. Open Settings > Cellular. The new number is listed, and Turn On This Line is on.
  • A test call. Apple’s activation steps end with a call. Call a number you know, then turn off Wi-Fi and open a web page to check mobile data on the data line.

When the eSIM will not activate

Apple’s steps for an eSIM that will not set up start with the quick fixes. After each one, open Control Center and check whether the carrier now shows in the status bar.

  1. Turn Airplane Mode on, wait a few seconds, then turn it off.
  2. Open Settings > Cellular. If the number you are activating is listed, turn the line off, then on again.
  3. Restart the iPhone 13.
  4. Check for a carrier settings update: open Settings > General > About, scroll to the eSIM section, and tap the version number next to Carrier. Tap Update if one is offered.
  5. On iOS 18 or later, the Apple Support app can run extra checks.
Run Diagnostics in the Apple Support app (illustration)
Illustration: Run Diagnostics in the Apple Support app.
What you see Likely cause What to try
No Cellular Plan Detected prompt The camera cannot read the code, or the code is on the same iPhone Scan from another screen or paper, or touch and hold the code in Mail or Safari
An error that the plan cannot be added The code was already used, or the carrier has not finished on its side Ask the carrier for a new code and confirm the eSIM is ready
SIM not supported The iPhone is locked to another carrier Check Carrier Lock in Settings > General > About
No Service after adding a travel eSIM You are still at home, or roaming is off on that line Wait until you arrive and check the line’s roaming setting
No Add eSIM option at all An iPhone 13 sold in China mainland, or a carrier restriction Check where the phone was sold and ask the carrier

If none of that works, contact the carrier with the error message, your phone number, your account PIN or password, and the iPhone’s IMEI or EID, both listed in Settings > General > About.

One thing not to do: Apple warns against deleting an eSIM as a troubleshooting step unless your carrier tells you to. Once it is gone, you need a new eSIM from the carrier to use the line again.

Remove an eSIM or start over

Delete an eSIM when you have moved the number to another phone, ended the plan, or are selling or giving away the iPhone 13. Deleting it does not cancel your plan, so contact the carrier first if you want to stop paying.

  1. Open Settings and tap Cellular.
  2. With one plan, tap Delete eSIM. With several, tap the plan you want to remove, then tap Delete Plan.
  3. Confirm.
Delete eSIM confirmation in Cellular settings (illustration)
Illustration: Delete eSIM confirmation in Cellular settings.

Apple’s page on erasing the eSIM on an iPhone has the details. When you erase all content and settings before selling the phone, the iPhone asks whether to keep or erase the eSIM, so choose erase if the line is not coming with you.

eSIM on iPhone 13 Questions

Can an iPhone 13 use two eSIMs at the same time?

Yes. The iPhone 13 and later support Dual SIM with two eSIMs, so both lines can be active with the SIM tray empty. You can also mix one physical SIM and one eSIM. Earlier models, such as the iPhone 12, can only pair one eSIM with a physical SIM.

Does the old phone stop working after the transfer?

The line does. Once the eSIM activates on the iPhone 13, the SIM on the previous phone is deactivated, whether it was an iPhone or an Android phone. The old phone still works on Wi-Fi, so you can finish copying anything you need.

Do I need Wi-Fi to set up an eSIM?

Apple asks for Wi-Fi or a hotspot during setup. The exception for eSIM-only models in some regions does not apply to the iPhone 13, which has a SIM tray.

Can I keep a plan I am not using on the phone?

Yes. Stored plans stay on the iPhone until you delete them. Open Settings > Cellular, tap the line and turn off Turn On This Line to pause it, then turn it back on when you need it. This suits a travel plan that the provider lets you top up for a later trip.