The buttons alone cannot erase an iPhone. They put it into recovery mode, and a Mac or Windows PC then performs the factory reset when you click Restore. If the phone is only frozen, the same buttons do a force restart instead, which erases nothing.
This covers every iPhone that uses the current Apple button layouts: iPhone 8 and later (including iPhone SE 2nd and 3rd generation and all Face ID models), iPhone 7 and 7 Plus, and iPhone 6s or earlier (including iPhone SE 1st generation). On the computer side, it covers Finder on a Mac and the Apple Devices app on Windows.
Force restart or factory reset: know which one you need
Many pages call a button combination a “hard reset,” and that label causes confusion. A force restart cuts power to the software and starts the phone again. Your photos, messages and apps stay where they are. A factory reset through recovery mode deletes everything on the iPhone and installs a fresh copy of iOS.
Try a force restart first if the screen is frozen, black or unresponsive. Go to recovery mode when the phone is stuck on the Apple logo, keeps restarting, will not finish an update, or you are locked out and need to start over.

What you need before you start
- A computer. A Mac with an up-to-date macOS uses Finder. A Windows PC needs the Apple Devices app, which you install from the Microsoft Store by searching for “Apple Devices” and choosing Get.
- A USB cable that can charge your iPhone and also carry data.
- Your Apple Account email and password. Erasing does not remove Activation Lock (explained below), so you need them to use the phone again.
- A recent backup, if you can still get one. A restore deletes anything that is not backed up. If the phone still works, back up your iPhone to iCloud or to the computer first. If it is locked or stuck, you may have to accept losing data since your last backup.
- Time and power. Plug the computer into the wall and allow up to an hour. Apple notes that the software download can take more than 15 minutes.
Button combinations for each iPhone model
Apple changed the sequence twice, so find your model in the table before you press anything. “Side button” is the button on the right edge. Older phones put the power button on the top.
| Your iPhone | Recovery mode buttons | Force restart buttons |
|---|---|---|
| iPhone 8, SE (2nd and 3rd gen), X and all later models | Press and release Volume Up, press and release Volume Down, then press and hold the side button | Same sequence, but let go when the Apple logo appears |
| iPhone 7 and 7 Plus | Press and hold the side button and Volume Down together | Same two buttons, let go at the Apple logo |
| iPhone 6s and earlier, SE (1st gen) | Press and hold the Home button and the top (or side) button together | Same two buttons, let go at the Apple logo |
The difference between the two columns is when you let go. For a force restart you release at the Apple logo. For recovery mode the phone must be connected to a computer, and you keep holding through the Apple logo until a picture of a computer and a cable appears. Apple calls this the “Connect to computer” screen.

Factory reset an iPhone using the buttons and a computer
These steps follow Apple’s recovery mode instructions. Do the button part in one smooth motion, with no pause between the volume presses.
- Connect the iPhone to the computer with the USB cable.
- On a Mac, open Finder. On a Windows PC, open the Apple Devices app. Leave it open.
- On the iPhone, press the buttons for your model from the table above.
- Keep holding the last button when the Apple logo appears. Release it only when the “Connect to computer” screen (a computer and a cable) shows on the iPhone.
- Look at the computer. Your iPhone appears in the Finder sidebar or in Apple Devices, with a message offering Update or Restore.
- Click Restore. Apple suggests trying Update first if you have not tried it yet and want to keep your data, then coming back to Restore if the update does not fix the phone.
- Confirm the restore and agree to the software terms when asked. The computer downloads iOS, erases the iPhone and installs the fresh copy. Keep the cable connected the whole time.
- Wait for the iPhone to show the Hello screen. That screen means the factory reset is finished, and you can disconnect the cable.

If the download takes longer than 15 minutes, the iPhone may leave recovery mode by itself and restart. Let the download finish on the computer, then repeat steps 3 and 4 to put the phone back into recovery mode and click Restore again.
Resetting an iPhone 7 or iPhone 7 Plus
The iPhone 7 and 7 Plus use a button combination that no other model shares. Hold the side button (right edge) and the Volume Down button (left edge) together while the phone is connected to the computer. The screen goes black, the Apple logo appears, and you keep both buttons held until the computer-and-cable image appears. Then continue from step 5 above. For a frozen iPhone 7 that you do not want to erase, hold the same two buttons and let go at the Apple logo.
Setting the iPhone up after the reset
On the Hello screen, follow the setup prompts. When you reach the apps and data step you can set the phone up as new or restore a backup. If you are bringing your data back, see this walkthrough on restoring your iPhone from a backup.
If Find My was on before the reset, the iPhone shows an Activation Lock screen and asks for the Apple Account and password that were signed in. This is expected. Apple’s Activation Lock page explains that erasing does not switch this protection off. Enter the original account details to continue. A recovery mode restore cannot remove Activation Lock from a phone whose owner’s password you do not have.
If you are locked out and have no computer
Recent iOS versions can erase a locked iPhone from the lock screen. Apple’s guide to resetting a forgotten passcode without a computer lists the requirements: iOS 15.2 or later, Find My turned on beforehand, a Wi-Fi or cellular connection, and your Apple Account password.
On iOS 17 or later, enter the wrong passcode until the iPhone Unavailable screen appears, tap Forgot Passcode?, then tap Start iPhone Reset on the Security Lockout screen. Enter your Apple Account password and tap Erase iPhone. On iOS 15.2 and iOS 16, an Erase iPhone option appears on the lockout screen instead. If none of these options show, you need a computer, an Apple Store or an Apple Authorized Service Provider. There is a separate guide to unlocking an iPhone without the passcode that goes into the lockout side in more depth.
If the iPhone works normally and you can open Settings, you do not need the buttons at all. Go to Settings > General > Transfer or Reset iPhone > Erase All Content and Settings. Our factory reset guide for all iPhone models walks through that route and the checklist for selling a phone.
When the button method does not work
- The phone shows the power-off slider instead. On iPhone 8 and later you held the side button with a volume button, or paused too long between presses. Start again with quick taps on Volume Up and Volume Down, then hold the side button and ignore the slider.
- The Apple logo appears and the phone restarts normally. You let go too early, or the phone was not connected to the computer. Recovery mode needs the cable attached and the button held past the logo.
- The computer does not see the iPhone. Update macOS or the Apple Devices app, try a different cable and USB port, and unlock the phone and tap Trust if it asks.
- An error such as 9, 4005, 4013 or 4014 appears. Apple’s restore error steps are to update the computer, try another USB cable, then another computer. If it keeps failing, Apple suggests contacting support.
- The screen stays black. Charge the iPhone for one hour and try the force restart again, as Apple recommends in its unresponsive iPhone article.
- A button is broken or stuck. Recovery mode needs working buttons. Apple directs you to service in that case.
How to confirm the reset worked
A successful factory reset ends on the Hello screen, the same screen a new iPhone shows. If you set it up as new, your old passcode is gone, the Home Screen shows only Apple’s built-in apps, and Settings > General > About shows the iOS version that was installed. A restore cannot be undone, so the only way to get your content back is from a backup made before the reset.
If you only meant to fix a frozen phone, a normal restart is often enough. This guide on restarting an iPhone on every model covers the slider method and the force restart side by side.
Factory Reset With Buttons: Reader Questions
Can I factory reset an iPhone with only the buttons and no computer?
No. Button presses can only force restart the phone or start recovery mode, and recovery mode needs a computer to restore iOS. Without a computer, the options are the lock-screen Forgot Passcode? route on iOS 17 or later, Settings if you can unlock the phone, or an Apple Store.
Does a force restart delete anything?
No. A force restart is like pulling the power for a moment. Apps that were open may lose unsaved work, but your photos, contacts, messages and settings stay on the phone.
Will the reset remove my eSIM?
Apple states that a restore from a computer does not delete the eSIM on an iPhone. The Settings reset and the lock-screen reset on iOS 17 or later let you choose whether to keep it.
I bought a used iPhone and it asks for someone else’s Apple Account. Can I reset it with the buttons?
A restore erases the phone but Activation Lock stays. The previous owner has to remove the iPhone from their account, which Apple says they can do in a web browser by signing in to iCloud.com if they no longer have the phone. Ask the seller to do this before you try anything else. Before selling your own phone, turn off Find My iPhone so the buyer does not hit this screen.
Does a factory reset delete my iCloud data?
No. Erasing the iPhone removes the copy on the device. Photos, contacts and other data that sync with iCloud stay in your account and return when you sign in again.