How to Enter Recovery Mode in Windows 11 (WinRE)

//

Michael Collins

The fastest way into recovery mode in Windows 11 is to hold the Shift key while you select Power > Restart. The PC restarts to a blue Choose an option screen, which is the Windows Recovery Environment.

These instructions cover Windows 11 Home and Pro on desktops, laptops and tablets, including PCs that start normally, PCs stuck at the sign-in screen and PCs that will not start at all. Windows 10 uses the same recovery screens, but Windows 10 reached end of support on October 14, 2025.

What recovery mode is in Windows 11

“Recovery mode” is the everyday name for the Windows Recovery Environment, usually shortened to WinRE. It is a small, separate copy of Windows stored on your drive that loads before your normal Windows does. Because it does not depend on your installed apps, drivers or user account, it can still run when Windows crashes, freezes at the logo or refuses to sign you in.

Entering WinRE changes nothing on its own. Your files, apps and settings stay exactly as they are until you pick a tool and confirm it. If you open the recovery screens and then select Continue, Windows starts as usual. For problems that do not need recovery mode, a support agent, Quick Assist or your PC maker may be the faster route.

Pick an entry route based on how far your PC gets:

How far the PC gets Best route
Windows starts and you can sign in Settings, Shift + Restart, or a command
Only the sign-in screen appears Shift + Restart from the sign-in screen
Windows fails at the logo or crashes while starting Automatic Repair, or interrupt startup three times
Nothing on the drive works A recovery drive or Windows installation media

Open recovery mode from Settings

This route takes longer than the Shift key, but it is the easiest to follow if you have never done this before.

  1. Select Start, then Settings (or press Windows key + I). The Settings app opens on the System page.
  2. Select Recovery in the list on the right. The Recovery page shows a Recovery options section.
  3. Next to Advanced startup, select Restart now. Windows warns that it will restart, so save any open work first.
  4. Confirm with Restart now in that message. The screen goes dark for a few seconds, then the blue Choose an option screen appears.
Windows Recovery Environment Choose an option screen reached from Settings (illustration)
Illustration: Windows Recovery Environment Choose an option screen reached from Settings.

On Windows 10 the same button sits under Settings > Update & Security > Recovery.

Hold Shift and select Restart

The Shift method works from the desktop and from the sign-in screen, which makes it useful when you cannot get past the password prompt.

  1. Select Start, then the Power icon. On the sign-in screen, the Power icon is in the bottom right corner.
  2. Press and hold Shift on the keyboard.
  3. Keep holding Shift and select Restart.
  4. Let go of Shift once the screen goes dark. The PC restarts to the blue Choose an option screen.
Windows Recovery Environment Choose an option screen reached with Shift and Restart (illustration)
Illustration: Windows Recovery Environment Choose an option screen reached with Shift and Restart.

If the PC restarts straight back to Windows, Shift was released too early or the key press was not registered. Try again and keep holding it until the screen goes dark.

Use a command

A command is handy when your mouse misbehaves or when you want to restart into recovery from a script or remote session.

Open Command Prompt or Terminal and type:

shutdown /r /o /t 0

Microsoft’s shutdown command reference explains that /r restarts the PC, /o goes to the advanced boot options menu (and only works together with /r), and /t 0 removes the usual 30 second wait. Running apps are closed without asking, so save your work before pressing Enter.

A second command, reagentc /boottore, run in an administrator Command Prompt, tells Windows to open the recovery screens the next time it starts, so you can restart later at a convenient moment. Both commands also appear in the guide to factory resetting Windows 11 from Command Prompt, which goes on to the systemreset command once you are in.

When Windows 11 will not start

You do not need a working desktop to reach WinRE. Microsoft documents several routes for a PC that fails during startup.

Automatic Repair. If Windows fails to start correctly multiple times in a row, it opens the recovery environment by itself. You see an Automatic Repair or Preparing Automatic Repair message, then a screen with an Advanced options button. Select it to get to Choose an option. System Restore needs a restore point to exist beforehand, so create a restore point in Windows 11 while the PC still works.

Interrupt startup on purpose. If the PC freezes at the logo instead of failing, trigger Automatic Repair yourself:

  1. Turn the PC on.
  2. When the Windows logo or the PC maker’s logo appears, hold the power button until the PC shuts off.
  3. Repeat steps 1 and 2 one more time.
  4. Turn the PC on a third time and leave it alone. Windows shows the Automatic Repair screen.
  5. Select Advanced options. The Choose an option screen appears.
Windows Recovery Environment Choose an option screen reached from Advanced options (illustration)
Illustration: Windows Recovery Environment Choose an option screen reached from Advanced options.

Hard shutdowns during startup are a last resort, not a routine shortcut, so use them only when the other routes are unavailable.

Recovery drive. A recovery drive is a USB flash drive you made earlier with the Recovery Drive tool in Windows. Plug it in, start the PC from the USB drive, and choose your keyboard layout to reach the recovery screens. Microsoft’s Recovery Drive page recommends recreating the drive once a year so it includes recent updates, and notes that creating one erases the USB drive.

Windows installation media. If you have no recovery drive, make a Windows 11 installation USB on another PC with Microsoft’s Media Creation Tool. The guide to putting Windows 11 onto a USB drive walks through that. Start the broken PC from the USB, select Next on the first setup screen, then choose Repair my PC (older media shows Repair your computer). Do not select Install now, because that starts a new installation instead of repairs.

To start from a USB drive, you may need the PC’s one-time boot menu key or a change to the boot order. The key varies by maker (F12, F11, F9 or Esc are common), and some PCs also have a dedicated recovery button. The article on opening BIOS in Windows 11 explains the firmware settings and maker keys.

Comparison of recovery mode entry routes when Windows starts, when only the sign-in screen works and when Windows will not start
Illustration: which route into recovery mode fits how far your PC gets.

What you can do on the recovery screens

The Choose an option screen has four tiles: Continue (leave and start Windows), Use a device (start from a USB drive or network), Troubleshoot and Turn off your PC. The repair tools live under Troubleshoot, and most of them under Troubleshoot > Advanced options. One of the most useful tiles there is Uninstall Updates, which is covered in rolling back a Windows 11 update.

Tool What it does
Reset this PC Reinstalls Windows, with a choice to keep or remove your personal files
Point-in-time restore Rolls the whole Windows drive, including files, back to a snapshot from the last few days (newer Windows 11 builds)
Startup Repair Finds and fixes common problems that stop Windows from loading
Startup Settings Restarts into a menu with Safe Mode and other startup options
Command Prompt Opens a command line for advanced repairs
Uninstall Updates Removes the most recent quality or feature update
UEFI Firmware Settings Restarts into the PC’s firmware (BIOS) settings; appears on UEFI PCs only
System Restore Returns system files and settings to an earlier restore point without touching personal files
System Image Recovery Restores a full system image backup you made earlier
Diagram of the WinRE menus from Choose an option to Troubleshoot to Advanced options and the tools listed there
Illustration: where the main tools sit in the Windows Recovery Environment.

Microsoft’s Windows Recovery Environment page describes each tool. Two of them deserve a closer read before you click. Point-in-time restore keeps snapshots for up to 72 hours and undoes everything you did after the snapshot, including new files on the Windows drive, as Microsoft’s point-in-time restore page explains. The guide to restoring your computer to an earlier date compares it with System Restore. Reset this PC is the heaviest option; the full walkthrough is in how to factory reset a Windows 11 PC or laptop.

For Safe Mode, select Startup Settings > Restart, and after the PC restarts press 4 for Safe Mode, 5 for Safe Mode with Networking or 6 for Safe Mode with Command Prompt.

Have your BitLocker recovery key ready

If your drive is encrypted with BitLocker or Device encryption, several recovery tools (and sometimes the recovery screens themselves) ask for a 48-digit recovery key. Microsoft’s Find your BitLocker recovery key page lists where it is usually kept: your Microsoft account (open aka.ms/myrecoverykey on a phone or another computer), a work or school account, a printout, or a USB drive. The BitLocker article for Windows 11 explains how to check whether your PC is encrypted and how to back up the key while Windows still works.

If you cannot get into recovery mode

  • Restart now does nothing, or Windows says the recovery environment cannot be found. Open Command Prompt as an administrator and run reagentc /info. If Windows RE status shows Disabled, run reagentc /enable, then try again.
  • F8 does nothing at startup. Windows 11 does not open the old F8 boot menu by default. Use one of the routes above instead of tapping keys.
  • The PC never boots from the USB drive. Check that you used the boot menu key for your PC’s maker, that the drive is plugged straight into the PC rather than a hub, and that the recovery drive or installation media was made for the same type of PC (Intel or AMD versus Arm).
  • The screen asks for a BitLocker key you do not have. Select the option to skip the drive if it is offered, or look the key up from another device as described above. Without the key, an encrypted drive cannot be unlocked.

How to leave recovery mode

Select Continue on the Choose an option screen to start Windows normally, or Turn off your PC to shut it down. If a tool such as Startup Repair finishes and leaves you back at the blue screen, Continue is still the way out. If the PC keeps starting in Safe Mode afterward, press Windows key + R, type msconfig, open the Boot tab and clear Safe boot.

Recovery Mode Questions

Does entering recovery mode delete my files?

No. Opening WinRE and looking around changes nothing. Files are only affected by specific tools: Reset this PC with Remove everything, point-in-time restore (which removes files created after its snapshot) and System Image Recovery. System Restore and Startup Repair leave personal files alone.

Is there one recovery key for every Windows 11 PC?

No. Windows itself uses Shift + Restart, not a startup key. Some PC makers add their own recovery key or button, often F11 or F9, but these open the maker’s recovery tools on some models and nothing on others, so check your PC maker’s support site.

Why does my PC open Automatic Repair every time it starts?

Windows lands there when it keeps failing to start. Select Advanced options > Troubleshoot > Advanced options and try the tools in this order: Startup Repair, then Uninstall Updates if the trouble began after an update, then System Restore. Reset this PC is the last step if none of them help.

How long does it take to get into recovery mode?

From Settings, Shift + Restart or the shutdown command, the blue screen usually appears within the time of a normal restart. Automatic Repair and USB routes take longer because Windows checks the drive first.